Free Shipping on All Orders
Lemon

Support

11" Hi-Hat Controller on Simmons Titan 50

Wiring, module settings, and tips for the 11" Hi-Hat Controller when used with the Simmons Titan 50.

Setup — 11" Hi-Hat Controller on Simmons Titan 50

Reduced — switch (open/closed)

The 11" Hi-Hat Controller works on your Simmons Titan 50 with reduced zones.

Continuous Open Closed

Wiring: 1× TRS pad + continuous pedal → Hi-Hat input (via DB-25 cable harness)

The Simmons hi-hat controller convention differs from the Roland-style variable CV that the Lemon pedal produces — some Simmons modules use a 3.5mm HH-CTRL jack and a different pedal curve. Open/closed response is reliable, but variable articulation (half-open, splash) is not guaranteed. Simmons is not listed on Lemon Cymbals' official compatibility page and Lemon sells a separate control-pedal SKU marketed for Alesis Nitro / Simmons modules.

Cable routing

  1. Connect the hi-hat pad and continuous pedal via the DB-25 cable harness.

Module settings

  1. MENU > TRIGGER > select Hi-Hat pad > adjust Sensitivity, Threshold, Crosstalk, Rim Sensitivity.

Tips

  1. The continuous pedal supports open, half-open, and closed positions.
  2. Stock hi-hat cymbal pads are single-zone.
  3. Calibrate the hi-hat pedal range (open/closed end-points) in the module settings so variable response tracks the full pedal travel.