Support
Setup for your Simmons Titan 50
Lemon pads cover snare, toms, kick, cymbals, ride, and hi-hat on the Simmons Titan 50, with the limitations noted below.
- Snare 2-zone
- Toms 2-zone
- Kick 1-zone
- Crash 1-zone
- Ride 1-zone
- Hi-hat Switch (open/closed)
Module snapshot
- Brand
- Simmons
- Model
- Titan 50
- Also known as
- Titan 50
Setup details by role
Snare pad 2-zone 1× TRS → SNARE connector on the DB-25 cable harness
The snare input on the cable harness is dual-zone. Stock snare is a 10" Dual Zone pad (head + rim switch).
Tom pad 2-zone 1× TRS per tom → TOM1, TOM2, TOM3 connectors on the DB-25 cable harness
The Titan 50's tom inputs are dual-zone, even though the kit's stock 8" tom pads are single-zone. A Lemon dual-zone tom pad triggers both head (center piezo) and rim (switch) once Tom Type is set to Dual.
Kick pad Works 1× TS or TRS → KICK connector on the DB-25 cable harness
Single-zone kick trigger via the cable harness. Only the head zone is active.
2-zone crash 1-zone 1× TRS → Crash input (via DB-25 cable harness)
The Titan 50 crash input is single-zone (bow only) — the manual specs the crash as single-zone and the MIDI chart maps a single crash note with no edge note (only the tom and snare inputs are dual-zone). A 2-zone cymbal triggers the bow zone; edge strikes won't sound separately.
3-zone ride 1-zone 1× TRS from the ride cymbal (Ride 2 output) → RIDE connector on the 25-pin cable harness — bow only
The Titan 50's RIDE input is single-zone — it triggers one note (MIDI note 51 = bow). A Lemon 3-zone ride plays as a bow-only ride; bell and edge won't register.
Hi-hat Open/Closed 1× TRS pad + pedal → Hi-Hat input (via 25-pin cable harness)
The Lemon hi-hat pad and pedal controller connect through the 25-pin cable harness and deliver reliable open and closed hi-hat.
