Support
Hi-Hat Controller Sensor on Millenium MPS-1000
Setup — Hi-Hat Controller Sensor on Millenium MPS-1000
Use as switch hi-hatThe Hi-Hat Controller Sensor works on the Millenium MPS-1000 as a switch hi-hat: open/closed only.
Continuous
Open
Closed
Wiring: Hi-hat plug → hi-hat pad + hi-hat-control plug → hi-hat controller, both on the multiple cable
The multiple cable carries a separate hi-hat-control plug, so the Lemon controller connects. That input was built for Millenium's own CH-13 hi-hat, whose position sensor sits inside the top pad; the Lemon controller is a separate plate under the pad — the layout Millenium itself switched to for its Roland-compatible CH-13X. Open and closed are expected; half-open and foot splash are not.
Hi-hat setup and troubleshooting guide ›Cable routing
- Plug the multiple cable's labelled hi-hat plug into the Lemon hi-hat pad's 1/4" TRS jack.
- Plug the multiple cable's hi-hat-control plug — the one that went to the HH-CTRL jack on the stock hi-hat — into the Lemon hi-hat controller.
Module settings
- Press [SETUP], select 'ADVANCE' and press [ENTER], then hit the hi-hat to select it; set 'SENSITIVITY', 'HEADROOM' and 'PEAK DECAY'.
- Select the pedal chick trigger and open 'CALIBRATION' with [ENTER]: press the pedal to the floor and press [–], then release the pedal slowly and press [+]. Press [EXIT] to leave.
- Press [EXIT] and then [ENTER] to save the setup.
Tips
- Hi-hat MIDI notes: open = 46, closed = 42, pedal chick = 44 — the module's own map also has half-open (23) and splash (21), which are not expected from the Lemon controller.
Hi-Hat Controller Sensor also fits 71 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71