Support

11" Hi-Hat Controller on Alesis Strike MultiPad

Wiring, module settings, and tips for the 11" Hi-Hat Controller when used with the Alesis Strike MultiPad.

The 11" Hi-Hat Controller is fully supported on your Alesis Strike MultiPad.

Continuous Open Closed

Wiring: 1× TRS pad → Trigger In 2/3 or 4/5 (Head+Rim) + hi-hat control pedal → HH Pedal input (Variable)

Continuous hi-hat control. The hi-hat pad connects to a dual-zone jack (Trigger In 2/3 or 4/5) set to Head+Rim for bow + edge, and the Lemon hi-hat control pedal connects to the dedicated HH Pedal input. In the Pedals menu, set the HH pedal Type to Variable so it sends a variable range of values for smooth open-to-closed response (a Switch option exists for fixed open/closed).

Cable routing

Connect a 1/4" TRS cable from the Lemon hi-hat pad to a free dual-zone jack (Trigger In 2/3 or 4/5).
Connect the Lemon hi-hat control pedal to the dedicated HH Pedal input.

Module settings

Press [Trigger], select the hi-hat pad's input (TRIN2–5) and set Type to Head+Rim.
Press [F4–Pedals], select Pedal = HH and set Type to Variable for continuous control.
Set the Op Pos / Cl Pos values to calibrate the open and close positions of the pedal.

Tips

Variable mode gives smooth open-to-closed transitions; calibrate Op Pos / Cl Pos after connecting.
The hi-hat pad needs one of the two dual-zone jacks for its bow + edge zones — plan jack use accordingly.

11" Hi-Hat Controller also fits 69 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Audiofront eDRUMin

Donner

Efnote

GEWA

Pearl

Pearl Mimic Pro

Roland

Simmons

Yamaha

Have a question? Read the FAQ. Need manual help? Email support.