Free Shipping on All Orders
Lemon

Support

11" Hi-Hat Controller on Efnote 7

Wiring, module settings, and tips for the 11" Hi-Hat Controller when used with the Efnote 7.

Setup — 11" Hi-Hat Controller on Efnote 7

Works

The 11" Hi-Hat Controller is fully supported on your Efnote 7.

Continuous Open Closed

Wiring: 1× TRS pad + 1× TRS pedal → Hi-Hat + pedal inputs (1/4" TRS jacks)

Module reads an analog CV hi-hat pedal (variable resistor / hall sensor), which the Lemon pedal provides. Expect open, closed, half-open and splash articulations after pedal calibration.

Cable routing

  1. Connect the hi-hat pad and pedal controller to their respective inputs.

Module settings

  1. Trigger parameters: Sensitivity, Threshold, Crosstalk, Retrigger.
  2. Exact menu path not fully documented — reference guide only.

Tips

  1. The Lemon pedal will trigger open/closed states.
  2. Half-open and splash articulations are not guaranteed — the module's pedal curve is tuned for EFNOTE's own EFD-MH controller.
  3. Calibrate the hi-hat pedal range (open/closed end-points) in the module settings so variable response tracks the full pedal travel.