Support
T550 12" Snare on Alesis Strike Pro
Setup — T550 12" Snare on Alesis Strike Pro
WorksYes — the T550 12" Snare works as a full snare on the Alesis Strike Pro: head + rim.
Head
Rim
Wiring: 1× TRS → SNARE input (1/4" TRS jack)
The snare input supports dual-zone (head + rim) triggering via the center piezo and the rim piezo.
Snare and tom setup and troubleshooting guide ›Cable routing
- Connect a 1/4" TRS cable from the snare pad to the SNARE input on the rear panel.
Module settings
- Press Edit > Triggers (button 19) to enter Trigger Mode.
- Turn Note Chase (button 12) on and strike the snare to select its trigger (or cursor to the Trig field and turn the data dial).
- Use the cursors to select a parameter, then the data dial to set Sensitivity (00-99).
- Set Threshold (00-99) and, if you get double-triggers, raise Retrigger (00-99).
- Pick a Curve (Linear, Log 1-4, Exp 1-4, Spline 1-4) to taste; press Save to keep the trigger settings.
Tips
- Head triggers from the center piezo, rim from a second piezo mounted under the head.
- Both zones share the one TRS connection (tip = head, ring = rim).
- On an input that reads head and rim, if the wrong zone plays, tune the module's head/rim settings for this pad's size; values set for a different-size pad may not carry over.
T550 12" Snare also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71