Support
Setup for your Alesis Strike Pro
Yes — Lemon pads cover snare, toms, kick, cymbals, ride, and hi-hat on the Alesis Strike Pro.
- Snare 2-zone
- Toms 2-zone
- Kick 1-zone
- Crash 2-zone
- Ride 3-zone
- Hi-hat Continuous
Module snapshot
- Brand
- Alesis
- Model
- Strike Pro
- Also known as
- Strike Pro, Strike Pro SE
Setup details by role
Snare pad 2-zone 1× TRS → SNARE input (1/4" TRS jack)
The snare input supports dual-zone (head + rim) triggering via center piezo and rim switch.
Tom pad 2-zone 1× TRS per tom → TOM 1–TOM 4 inputs (1/4" TRS jacks)
The tom inputs support dual-zone (head + rim) triggering via center piezo and rim switch.
Kick pad Works 1× TS or TRS → KICK input (1/4" TRS jack)
Single-zone kick trigger. Only the head zone is active.
2-zone crash 2-zone 1× TRS → Crash 1, Crash 2, or Crash 3 input
All three Crash inputs are individual ¼″ TRS jacks on the rear panel. Set Input Type to Switch for dual-zone cymbals. Choke is supported.
3-zone ride 3-zone 2× TRS → RIDE 1 (bow/edge) + RIDE 2 (bow/bell)
The Strike Pro has two dedicated ride inputs (RIDE 1 and RIDE 2) and its stock ride uses the same dual-cable, piezo-plus-switch design as the Lemon 3-zone ride — both cables plug straight in, no adapter needed.
Hi-hat Continuous 1× TRS (pad) → HI HAT input + 1× TRS (pedal) → HH CONTROL input
Variable hi-hat pedal control is supported — the Lemon pedal drives open, closed, half-open, and splash articulations.
