Support
T550 12" Snare on Roland TD-27
Setup — T550 12" Snare on Roland TD-27
WorksYes — the T550 12" Snare works as a full snare on the Roland TD-27: head + rim.
Head
Rim
Wiring: SNARE connector on the DB-25 cable snake → snare pad
Dual-zone triggering: head (tip) and rim (ring) are read over the one lead and play separate sounds.
Snare and tom setup and troubleshooting guide ›Cable routing
- Plug the SNARE connector on the DB-25 cable snake into the snare pad.
Module settings
- Press [SYSTEM], select "TRIGGER" and press [ENTER], then select "BANK" and press [ENTER] to open the TRIGGER BANK screen.
- Strike the snare (display shows "S") or use the cursor buttons to select the SNARE input.
- Use the dial to set the Trig Type to the model that matches your snare pad.
- Back on the TRIGGER MENU, open "PARAM", select the snare, then set Sensitivity from the cursor + dial.
Tips
- Head triggers from the center piezo, rim from a second piezo mounted under the head.
- On an input that reads head and rim, if the wrong zone plays, tune the module's head/rim settings for this pad's size; values set for a different-size pad may not carry over.
T550 12" Snare also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71