Support

T950 13"x5" Snare Drum on Alesis Strike Pro

Wiring, module settings, and tips for the T950 13"x5" Snare Drum when used with the Alesis Strike Pro.

Yes — the T950 13"x5" Snare Drum works as a full snare on the Alesis Strike Pro: head + rim.

Head Rim

Wiring: 1× TRS → SNARE input (1/4" TRS jack)

The snare input supports dual-zone (head + rim) triggering via center piezo and rim switch.

Connect a 1/4" TRS cable from the snare pad to the SNARE input on the rear panel.

Press Edit > Triggers (button 19) to enter Trigger Mode.
Turn Note Chase (button 12) on and strike the snare to select its trigger (or cursor to the Trig field and turn the data dial).
Use the cursors to select a parameter, then the data dial to set Sensitivity (00-99).
Set Threshold (00-99) and, if you get double-triggers, raise Retrigger (00-99).
Pick a Curve (Linear, Log 1-4, Exp 1-4, Spline 1-4) to taste; press Save to keep the trigger settings.

Head triggers from the center piezo, rim triggers from the rim switch.
Both zones respond independently on the TRS connection (tip = head, ring = rim).

T950 13"x5" Snare Drum also fits 73 other drum modules — see setup

Other compatible drum modules

Have a question? Read the FAQ. Need manual help? Email support.