Support

T550 12" Snare on Roland TD-25

Wiring, module settings, and tips for the T550 12" Snare when used with the Roland TD-25.

Yes — the T550 12" Snare works as a full snare on the Roland TD-25: head + rim.

Head Rim

Wiring: SNARE connector on the DB-25 cable snake → snare pad

Dual-zone triggering: head (tip) and rim (ring) are read over the one lead and play separate sounds.

Snare and tom setup and troubleshooting guide ›

Cable routing

Plug the SNARE connector on the DB-25 cable snake into the snare pad.

Snare and tom setup and troubleshooting guide ›

Module settings

In the KIT screen, press [F3] (MENU), then [F3] (SETUP) to open the SETUP screen.
Select "Trigger Settings" to open the TRIGGER SETTINGS screen, then strike the snare to select it.
Use the [INSTRUMENT] knob to set the Pad type to the model that matches your snare pad.
Use the [F2]/[F3] buttons to select "Sensitivity" and turn the [INSTRUMENT] knob to adjust it.

Tips

Head triggers from the center piezo, rim from a second piezo mounted under the head.
On an input that reads head and rim, if the wrong zone plays, tune the module's head/rim settings for this pad's size; values set for a different-size pad may not carry over.

T550 12" Snare also fits 76 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Audiofront eDRUMin

Donner

Efnote

GEWA

Lekato

Lekato PD708

Millenium

Millenium MPS-1000

NUX

Pearl

Pearl Mimic Pro

Roland

Simmons

Yamaha

Have a question? Read the FAQ. Need manual help? Email support.