Support
T550 12" Snare on Alesis DM10 MKII
Setup — T550 12" Snare on Alesis DM10 MKII
WorksYes — the T550 12" Snare works as a full snare on the Alesis DM10 MKII: head + rim.
Head
Rim
Wiring: SNARE connector on the DB-25 cable snake → snare pad
The snare input on the cable snake supports dual-zone (head + rim) triggering via the center piezo and the rim piezo.
Snare and tom setup and troubleshooting guide ›Cable routing
- Plug the SNARE connector on the DB-25 cable snake into the snare pad.
Module settings
- Press Trigger to enter the trigger interface page, then hit the Snare pad to select it.
- Adjust Head Sensitivity, Rim Sens, and Threshold to taste.
- Leave Head-Rim Adj low — it reduces crosstalk between head and rim rather than balancing them, and a high value can silence a deliberate head-and-rim hit.
- Press F3-Save to keep the settings — otherwise they are lost when you power off the module.
Tips
- Head triggers from the center piezo, rim from a second piezo mounted under the head.
- On an input that reads head and rim, if the wrong zone plays, tune the module's head/rim settings for this pad's size; values set for a different-size pad may not carry over.
T550 12" Snare also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71