Support
Setup for your Alesis DM10 MKII
Lemon pads cover snare, toms, kick, cymbals, ride, and hi-hat on the Alesis DM10 MKII, with the limitations noted below.
- Snare 2-zone
- Toms 2-zone
- Kick 1-zone
- Crash 2-zone
- Ride 2-zone
- Hi-hat Switch (open/closed)
Module snapshot
- Brand
- Alesis
- Model
- DM10 MKII Pro
- Also known as
- DM10 MKII, DM10 MK2
Setup details by role
Snare pad 2-zone 1× TRS → SNARE connector on the DB-25 cable snake
The snare input on the cable snake supports dual-zone (head + rim) triggering via the center piezo and the rim piezo.
Tom pad 2-zone 1× TRS per tom → TOM1, TOM2, TOM3 connectors on the DB-25 cable snake
The tom inputs on the cable snake support dual-zone (head + rim) triggering via the center piezo and the rim piezo.
Kick pad Works 1× TS or TRS → KICK connector on the DB-25 cable snake
Single-zone kick trigger via the cable snake. Only the head zone is active.
2-zone crash 2-zone 1× TRS → Crash 1 on the DB-25 cable snake, or the rear-panel Crash 2 Trigger Input
A DB-25 cable snake plus two rear-panel ¼″ TRS trigger inputs, Crash 2 and Tom 4. Updated DM10 platform. Bow and edge read independently over one TRS cable; the edge zone is tuned with Rim Sens.
3-zone ride 2-zone 1× TRS: Ride 1 (bow/edge) → RIDE connector on the DB-25 cable snake
Plug the Lemon ride's Ride 1 cable into the RIDE connector for bow + edge — no cymbal modification.
Hi-hat Open/Closed 1× TRS (pad) → hi-hat trigger on the cable snake + 1× TRS (controller) → the hi-hat pedal lead on the cable snake
The Lemon hi-hat controller uses the Roland VH/FD convention, not documented for continuous CV here — so with the Lemon controller, treat hi-hat as open/closed.
