Support

9" Dual-Zone Splash on Audiofront eDRUMin

Wiring, module settings, and tips for the 9" Dual-Zone Splash when used with the Audiofront eDRUMin.

Yes — the 9" Dual-Zone Splash works as a full 2-zone crash on the Audiofront eDRUMin: bow + edge.

Bow Edge

Wiring: 1× TRS → any eDRUMin input (1/4" TRS jack)

All inputs are universal and configurable. Supports dual-zone cymbals from any manufacturer.

Connect the cymbal pad to any available eDRUMin input using a standard 1/4" TRS cable.
Models: eDRUMin 4 (4 inputs + 1 pedal), eDRUMin 8 (8 + 1 pedal), eDRUMin 10 (10 + 2 pedals). All inputs are universal.

Open the eDRUMin Control Application and select the cymbal input (Auto-Select: hit the pad, or click it in the Input Selector).
If a matching factory preset exists, open the Preset Manager, select the input and double-click it — then skip to the fine-tuning step.
Otherwise open the Trigger Editor and set Input Mode to Stereo, then press the Pad Type Selector and choose the dual-zone (bow + edge) cymbal type that matches your pad.
Use Activate Calibrate Mode, then hit bow and edge to auto-set Gain, Thresh, and the Edge/Bell scalers.
Fine-tune Gain, Thresh, Scan, Hold, Decay, Edge Sense, Crosstalk, and the Velocity Curves as needed.

The eDRUMin is a MIDI trigger interface — it converts pad signals to MIDI for a DAW, VST, or external sound module.
Brand-agnostic: works with Roland, Yamaha, Alesis, and third-party pads.
Choke is fully supported.
Cymbal types available: Dual Zone Cymbal, Metal Dual Zone.

Setup — 9" Dual-Zone Splash on Audiofront eDRUMin