Support

9" Dual-Zone Splash on Simmons Titan 70

Wiring, module settings, and tips for the 9" Dual-Zone Splash when used with the Simmons Titan 70.

Yes — the 9" Dual-Zone Splash works as a full 2-zone crash on the Simmons Titan 70: bow + edge.

Bow Edge

Wiring: 1× TRS → EXP1 or EXP2 (1/4" dual-zone input) on the back panel

Dual-zone cymbal triggering runs through the EXP1 and EXP2 inputs on the back panel — the manual describes them as being for additional dual-zone pads, and each sends its own center and rim MIDI note. The two crash branches of the cable harness are single-zone (one MIDI note each), so connect Lemon 2-zone cymbals to EXP1/EXP2 for bow and edge; a third and fourth cymbal can still go to the harness crash branches as bow-only.

Cable routing

Connect a 1/4" TRS cable from the cymbal pad to EXP1 or EXP2 on the back panel.

Module settings

Press the SETUP button, then strike the cymbal pad to select it (the LED at the right of the display shows which input is selected).
Press SETUP repeatedly to step through Sens, Retrigger, Threshold, Curve, and X-Talk for that input.

Tips

Use EXP1 or EXP2 for bow + edge — the crash branches on the cable harness read the bow zone only.
The Lemon 2-zone cymbal is one TRS cable: tip = bow piezo, ring = edge switch.

9" Dual-Zone Splash also fits 74 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Audiofront eDRUMin

Donner

Efnote

GEWA

NUX

Pearl

Pearl Mimic Pro

Roland

Simmons

Yamaha

Have a question? Read the FAQ. Need manual help? Email support.