Official US store Free shipping Bundle & Save up to 20%
Lemon

Support

9" Dual-Zone Splash on Alesis Crimson II

Wiring, module settings, and tips for the 9" Dual-Zone Splash when used with the Alesis Crimson II.

Setup — 9" Dual-Zone Splash on Alesis Crimson II

Works

Yes — the 9" Dual-Zone Splash works as a full 2-zone crash on the Alesis Crimson II: bow + edge.

Bow Edge

Wiring: 1× TRS → Crash 1 connector on the cable snake, or 1× TRS → Crash 2 jack on the rear panel

Same platform as the Command. Crash 1 is on the cable snake (TRS). Crash 2 is a ¼″ TRS jack on the rear panel. Both support 2-zone operation.

Cable routing

  1. Connect a ¼″ TRS cable from the cymbal to the Crash 1 connector on the cable snake.
  2. Alternative: Connect a ¼″ TRS cable from the cymbal to the Crash 2 jack on the rear panel.

Module settings

  1. Go to Kit → Menu → Trigger. Select the Crash input.
  2. Adjust Sensitivity, Threshold, Curve, and Rim Sens.
  3. Set Head-Rim Adj to balance bow and edge response.

Tips

  1. Xtalk parameter can reduce false triggers from nearby pads.
  2. Retrig Cancel helps prevent double triggering on hard strikes.
9" Dual-Zone Splash also fits 73 other drum modules — see setup

Support contact

Have a question? Read the FAQ. Need manual help? Email support.