Support

9" Dual-Zone Splash on Simmons SD2000

Wiring, module settings, and tips for the 9" Dual-Zone Splash when used with the Simmons SD2000.

Yes — the 9" Dual-Zone Splash works as a full 2-zone crash on the Simmons SD2000: bow + edge.

Bow Edge

Wiring: 1× TRS → CRASH1 lead on the pad harness, or the discrete CRASH2 side-panel jack

Dual-zone cymbal triggering supported on Crash1 and Crash2 inputs.

Connect the cymbal to the CRASH1 lead on the module's multi-pin pad harness using a standard 1/4" TRS cable, or to the discrete CRASH2 dual-zone 1/4" TRS jack on the module's side panel.
The SD2000's main pads all route through the supplied pad harness (multi-pin connector into the Serial Connection Jack on the bottom); only the side-panel TOM4 and CRASH2 inputs are individual 1/4" TRS jacks.

Press [Utility], then the Function soft-key under "Trigger" on the Main Utility screen.
Select the Crash input (Follow Trigger — strike it — or Current Trigger).
Adjust Sensitivity, Threshold, Curve, Retrigger, Crosstalk, Splash Sensitivity.

9" Dual-Zone Splash also fits 73 other drum modules — see setup

Other compatible drum modules

Have a question? Read the FAQ. Need manual help? Email support.