Official US store Free shipping Bundle & Save up to 20%
Lemon

Support

9" Dual-Zone Splash on Alesis Nitro Ultimate

Wiring, module settings, and tips for the 9" Dual-Zone Splash when used with the Alesis Nitro Ultimate.

Setup — 9" Dual-Zone Splash on Alesis Nitro Ultimate

Use as 1-zone crash

Yes — the 9" Dual-Zone Splash works on the Alesis Nitro Ultimate as a 1-zone crash: bow only.

Bow Edge

Wiring: 1× TRS → Crash 1 connector on the cable snake, or 1× TRS → Crash 2 / CYM 2 jack on the rear panel

Nitro platform variant. The crash input is single-zone (bow only) — the MIDI chart maps a single note per crash with no separate edge note. A 2-zone cymbal triggers the bow zone; edge strikes won't sound separately.

Cable routing

  1. Connect a ¼″ TRS cable from the cymbal to the Crash 1 connector on the cable snake.
  2. Or connect the cymbal to the Crash 2 / CYM 2 jack on the rear panel.

Module settings

  1. Press the Mode button until Normal Mode (Kit, Voice, Song) is active.
  2. Hit the crash pad so the module selects that input.
  3. Press the Utility button repeatedly until SEN (Pad sensitivity) appears, then set it with the - and + buttons.
  4. Press Utility until THR (Pad threshold) appears, then set it with the - and + buttons.
  5. Press Save to keep the settings — otherwise they return to defaults when you power the module off.

Tips

  1. The crash input reads the bow zone only — edge strikes won't produce a separate sound.
  2. CRO (Crosstalk) helps reduce false triggers from nearby pads.
9" Dual-Zone Splash also fits 73 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Donner

Efnote

GEWA

NUX

Pearl

Roland

Simmons

Yamaha

Support contact

Have a question? Read the FAQ. Need manual help? Email support.