Free Shipping on All Orders
Lemon

Support

15" Triple-Zone Crash/Ride on Audiofront eDRUMin

Wiring, module settings, and tips for the 15" Triple-Zone Crash/Ride when used with the Audiofront eDRUMin.

Setup — 15" Triple-Zone Crash/Ride on Audiofront eDRUMin

Works

The 15" Triple-Zone Crash/Ride is fully supported on your Audiofront eDRUMin.

Bell Bow Edge

Wiring: 2× TRS → two adjacent eDRUMin inputs (1/4" TRS jacks)

Set one input to Roland 3-Zone Ride (bow/edge) and the adjacent input auto-becomes bell. Also supports Bell Sense for single-input 3-zone on compatible pads.

Cable routing

  1. Connect the ride cymbal bow/edge cable to one eDRUMin input.
  2. Connect the ride cymbal bell cable to the adjacent input.
  3. Two separate 1/4" TRS cables are required for full 3-zone operation.
  4. Alternatively, single-cable 3-zone is possible via Bell Sense on compatible pads.

Module settings

  1. Open the eDRUMin Control Application > select input > Trigger Editor.
  2. Set Pad Type to Roland 3-Zone Ride — the adjacent input automatically becomes the bell input.
  3. Also available: Yamaha 3-Zone Cymbal, Metal 3-Zone pad types.
  4. Adjust: Gain, Thresh, Scan, Hold, Decay, Bell Sense, Crosstalk, Velocity Curves.
  5. Use Preset Manager for quick setup.

Tips

  1. The eDRUMin is the most flexible option for 3-zone ride — works with pads from any manufacturer.
  2. Bell Sense mode can detect bell hits from a single TRS cable on supported pads.
  3. Pad types: Roland 3-Zone Ride, Yamaha 3-Zone Cymbal, Metal 3-Zone.