Support

9" Dual-Zone Splash on GEWA G9

Wiring, module settings, and tips for the 9" Dual-Zone Splash when used with the GEWA G9.

Yes — the 9" Dual-Zone Splash works as a full 2-zone crash on the GEWA G9: bow + edge.

Bow Edge

Wiring: 1× TRS → Crash or AUX input (1/4" TRS jack)

Full dual-zone cymbal support with bow and edge. Touchscreen interface.

Connect to a CRASH input or an AUX input using a standard 1/4" TRS cable.
All trigger inputs are individual 1/4" TRS jacks — rear panel: AUX 4, AUX 3, AUX 2, AUX 1, RIDE, CRASH 2, CRASH 1, HH CTRL, HI-HAT, TOM 4, TOM 3, TOM 2, TOM 1, SNARE, KICK, plus a FOOT SW jack. The G9 has four AUX inputs (the G3/G5 have two).

Tap the [Advanced] button and open Trigger Settings mode.
In the Input Channels list, select the Crash/Aux input the cymbal is on; tap the Bow or Edge component in the Trigger Selection panel.
In the Trigger Settings panel, adjust Gain, Threshold, High Level, Scan Time, Retrigger Mask and X-Talk.
In the Advanced Settings function set, set the Bow component's Trigger Type to Dual and the Edge component to Switch.

9" Dual-Zone Splash also fits 73 other drum modules — see setup

Other compatible drum modules

Have a question? Read the FAQ. Need manual help? Email support.