Support

9" Dual-Zone Splash on Roland TD-07

Wiring, module settings, and tips for the 9" Dual-Zone Splash when used with the Roland TD-07.

Yes — the 9" Dual-Zone Splash works as a full 2-zone crash on the Roland TD-07: bow + edge.

Bow Edge

Wiring: 1× TRS → CRASH1 connector on the DB-25 cable snake, or CRASH2 / AUX direct jack on the rear panel

Dual-zone crash triggering: bow (tip) and edge (ring) respond independently via the single TRS connection. Choke works by grabbing the cymbal edge. The TD-07 supports Roland CY-series 2-zone cymbals.

Cable routing

Connect a ¼″ TRS cable from the cymbal to the CRASH1 connector on the DB-25 cable snake.
For additional cymbals, connect to the CRASH2 or AUX input on the rear panel.

Module settings

Press [SETUP], select "PAD" with the cursor buttons, and press [ENTER].
Strike the cymbal to select its input on the "PAD" screen.
Select "Type" with the cursor buttons and use the dial to set it to CY8 or CY5 to match your cymbal.
Fine-tune "Sens" (1-32) and "Threshold" (0-31) so bow and edge track evenly.

Tips

Bow and edge zones respond independently.
Choke works by grabbing the cymbal edge.
CRASH2 and AUX are direct jacks on the rear panel, not part of the cable snake.

9" Dual-Zone Splash also fits 73 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Audiofront eDRUMin

Donner

Efnote

GEWA

NUX

Pearl

Pearl Mimic Pro

Roland

Simmons

Yamaha

Have a question? Read the FAQ. Need manual help? Email support.