Support
Setup for your Audiofront eDRUMin
Yes — Lemon pads cover snare, toms, kick, cymbals, ride, and hi-hat on the Audiofront eDRUMin.
- Snare 2-zone
- Toms 2-zone
- Kick 1-zone
- Crash 2-zone
- Ride 3-zone
- Hi-hat Continuous
Build my kit for the Audiofront eDRUMin
Every pad here is a full fit for this module and in stock.
-
High tom
T950 10"x5" High Tom
$119.99
-
Low tom
T950 13"x13" Floor Tom
$209.99
-
Crash
15" Triple-Zone Crash/Ride
$129.00
-
Ride
20" Triple-Zone Crash/Ride
$169.00
-
Hi-hat
14" 2-Piece Electronic Hi-Hat Cymbals
$259.00
- Subtotal
- $886.98
- Bundle & Save (10.6%)
- −$94.29
- Kit price
- $792.69
Module snapshot
- Brand
- Audiofront
- Model
- eDRUMin
- Also known as
- eDRUMin, edrumin
Setup details by role
Snare pad 2-zone 1× TRS → any eDRUMin input (1/4" TRS jack)
All inputs are universal and configurable. Supports dual-zone pads from any manufacturer.
Tom pad 2-zone 1× TRS → any eDRUMin input per tom (1/4" TRS jacks)
All inputs are universal and configurable. Supports dual-zone pads from any manufacturer.
Kick pad Works 1× TS or TRS → any eDRUMin input (1/4" TRS jack)
All inputs are universal and configurable. Single-zone kick trigger.
2-zone crash 2-zone 1× TRS → any eDRUMin input (1/4" TRS jack)
All inputs are universal and configurable. Supports dual-zone cymbals from any manufacturer.
3-zone ride 3-zone 2× TRS → two adjacent eDRUMin inputs (1/4" TRS jacks)
Set one input to Roland 3-Zone Ride (bow/edge) and the adjacent input auto-becomes bell.
Hi-hat Continuous 1× TRS pad → an eDRUMin input + 1× TS or TRS (controller) → the pedal input
Full continuous hi-hat control. The hihat controller input supports both Roland and Yamaha controllers (p.6). The manual sets no cable requirement in text; its Pedal Input Wiring Diagrams (p.54) show two controller types — an FSR controller wired tip-to-sleeve, and a Hall-sensor controller using all three conductors. The Lemon controller is wired tip-to-sleeve, so a TS or a TRS cable works. eDRUMin 10 has two pedal inputs.
