Support
9" Dual-Zone Splash on Alesis Strata Prime
Setup — 9" Dual-Zone Splash on Alesis Strata Prime
WorksYes — the 9" Dual-Zone Splash works as a full 2-zone crash on the Alesis Strata Prime: bow + edge.
Bow
Edge
Wiring: 1× TRS → CYMBAL 1–CYMBAL 4 trigger input (1/4" TRS jack)
The four Cymbal trigger slots read Bow, Edge, and Bell, so a 2-zone crash lands its Bow and Edge zones with edge choke supported. Each Cymbal input is an individual 1/4" TRS jack.
Crash setup and troubleshooting guide ›Cable routing
- Connect a 1/4" TRS cable from the cymbal to a CYMBAL 1, CYMBAL 2, CYMBAL 3, or CYMBAL 4 trigger input on the rear panel (User Guide p.7).
Module settings
- Press the Kit button and tap Trigger to open Trigger mode; tap Hit Select and strike the cymbal to select its C1-C4 (Cymbal) input.
- Load a matching Trigger Preset so Bow and Edge respond, or in Tweaks set Bow Sensitivity (1.0-32.0) and Edge Sensitivity (1.0-32.0).
- In Tweaks, set Threshold (1-127) to taste.
- In Advanced, set Choke Time (1-200 ms) for how long you must grab the edge to mute.
- If edge hits play a bell sound, toggle Invert Bell & Edge (Off/On) on that input (Advanced); if a hard crash leaves late false triggers, raise Edge Decay Boost (0-100).
Tips
- Bow plays from the surface; Edge plays the second zone and supports choke when you grab it.
- If a hard crash leaves late false triggers as the cymbal swings, raise Edge Decay Boost.
- If a nearby pad triggers this cymbal, run Learn XTalk on the pad that is causing the crosstalk.
9" Dual-Zone Splash also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71