Support
18" Triple-Zone Crash/Ride on Audiofront eDRUMin
Setup — 18" Triple-Zone Crash/Ride on Audiofront eDRUMin
WorksYes — the 18" Triple-Zone Crash/Ride works as a full 3-zone ride on the Audiofront eDRUMin: bow + bell + edge.
Bell
Bow
Edge
Wiring: 2× TRS → two adjacent eDRUMin inputs (1/4" TRS jacks)
Set one input to Roland 3-Zone Ride (bow/edge) and the adjacent input auto-becomes bell.
Ride setup and troubleshooting guide ›Cable routing
- Connect the cymbal's Ride 1 output (bow/edge) to one eDRUMin input.
- Connect the cymbal's Ride 2 output (bell) to the adjacent input — on the ED8/ED10 bow/edge goes to the top input and the bell to the bottom one; on the ED4, bow/edge left, bell right.
- Two separate 1/4" TRS cables are required for full 3-zone operation.
Module settings
- Open the eDRUMin Control Application > select the input > Trigger Editor.
- Set the Pad Type of the bow/edge input to 'Roland 3-Zone Ride' — the adjacent input automatically becomes the Bell input.
- Adjust Gain, Thresh, Scan, Hold, Decay, Crosstalk, and the Velocity Curves.
- Use the Preset Manager for quick setup — eDRUMin ships factory presets for many commercially available pads.
Tips
- Audiofront developed against a Lemon 18" Ride: it is in the manual's list of gear used during development (p.6), and one of the two cymbal positional-sensing algorithms was "designed to support the Lemon 18” Ride" (p.20).
- The eDRUMin works with pads from any manufacturer.
- If the edge and bell sounds come out swapped, follow the bell and edge section of the ride setup guide.
18" Triple-Zone Crash/Ride also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71