Official US store Free shipping Bundle & Save up to 15%
Lemon

Support

T550 12" Kick on Donner DED-500

Wiring, module settings, and tips for the T550 12" Kick when used with the Donner DED-500.

Setup — T550 12" Kick on Donner DED-500

Works

Yes — the T550 12" Kick works as a full kick on the Donner DED-500: single zone.

Trigger

Wiring: KICK lead on the Data In (DB25) harness → kick pad

Single-zone kick trigger. Only the head zone is active.

Kick setup and troubleshooting guide ›

Cable routing

  1. Plug the KICK lead on the module's DB25 signal-connection harness into the kick pad (the harness plugs into the module's "Data In" port).
Kick setup and troubleshooting guide ›

Module settings

  1. Upon the setting interface, select TRIG and press [ENTER] to enter the trigger interface, then use the [◀]/[▶] buttons to select the Kick pad.
  2. Adjust Sensitivity, Threshold, and Curve; raise Mask Time if the beater double-triggers.

Tips

  1. Single-zone operation — only the head zone is active.
T550 12" Kick also fits 76 other drum modules — see setup

Support contact

Have a question? Read the FAQ. Need manual help? Email support.