Official US store Free shipping Bundle & Save up to 15%
Lemon

Support

T550 12" Kick on Alesis Nitro Max

Wiring, module settings, and tips for the T550 12" Kick when used with the Alesis Nitro Max.

Setup — T550 12" Kick on Alesis Nitro Max

Works

Yes — the T550 12" Kick works as a full kick on the Alesis Nitro Max: single zone.

Trigger

Wiring: Kick connector on the 25-pin cable snake → kick pad

Single-zone kick trigger via the cable snake. Only the head zone is active.

Kick setup and troubleshooting guide ›

Cable routing

  1. Plug the Kick connector on the 25-pin cable snake into the kick pad.
Kick setup and troubleshooting guide ›

Module settings

  1. Press the Mode button until Normal Mode (Kit, Voice, Song) is active.
  2. Trigger the kick pad with the pedal so the module selects that input.
  3. Press the Utility button repeatedly until SEN (Pad sensitivity) appears, then set it with the - and + buttons.
  4. Press Utility until THR (Pad threshold) appears, then set it with the - and + buttons.
  5. Press Save to keep the settings — otherwise they return to defaults when you power the module off.

Tips

  1. Single-zone operation — only the head zone is active.
T550 12" Kick also fits 76 other drum modules — see setup

Support contact

Have a question? Read the FAQ. Need manual help? Email support.