Support
T550 12" Kick on Alesis Nitro
Setup — T550 12" Kick on Alesis Nitro
WorksYes — the T550 12" Kick works as a full kick on the Alesis Nitro: single zone.
Trigger
Wiring: Kick connector on the 25-pin cable snake → kick pad
Single-zone kick trigger via the cable snake. Only the head zone is active.
Kick setup and troubleshooting guide ›Cable routing
- Plug the Kick connector on the 25-pin cable snake into the kick pad.
Module settings
- Trigger the kick pad with the pedal, or press its corresponding Pad Select button, so the module selects that input.
- Press Utility, then press Page/Select until the setting you want appears: SEN (Pad sensitivity), THR (Pad threshold), CRO (Pad crosstalk), or CUR (Pad velocity curve).
- Set the value with the < and > buttons.
- Press Save to keep the settings — otherwise they return to defaults when you power the module off.
Tips
- Single-zone operation — only the head zone is active.
T550 12" Kick also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71