Official US store Free shipping Bundle & Save up to 15%
Lemon

Support

T550 12" Kick on Roland TD-17

Wiring, module settings, and tips for the T550 12" Kick when used with the Roland TD-17.

Setup — T550 12" Kick on Roland TD-17

Works

Yes — the T550 12" Kick works as a full kick on the Roland TD-17: single zone.

Trigger

Wiring: The “KIK” lead on the dedicated connection cable → kick pad

Single-zone kick trigger via the dedicated connection cable. Only the head zone is active.

Kick setup and troubleshooting guide ›

Cable routing

  1. Plug the lead labeled “KIK” on the dedicated connection cable into the kick pad.
Kick setup and troubleshooting guide ›

Module settings

  1. Press [SETUP], turn the dial to select "Pad Settings", then press [ENTER].
  2. Press [F1] (TYPE), then strike the kick or select the KICK input.
  3. Turn the dial to set Pad Type to KD10.
  4. Press [F2] (BASIC), select "Sensitivity", and turn the dial to adjust it.

Tips

  1. Single-zone operation — only the head zone is active.
T550 12" Kick also fits 76 other drum modules — see setup

Support contact

Have a question? Read the FAQ. Need manual help? Email support.