Support

T950 20"x12" Kick Drum on Donner DED-500

Wiring, module settings, and tips for the T950 20"x12" Kick Drum when used with the Donner DED-500.

Yes — the T950 20"x12" Kick Drum works as a full kick on the Donner DED-500: single zone.

Trigger

Wiring: 1× TS or TRS → KICK lead on the DB25 harness

Single-zone kick trigger. Only the head zone is active.

Connect a 1/4" TS or TRS cable from the kick pad to the KICK lead on the module's DB25 signal-connection harness (the harness plugs into the module's "Data In" port).

Upon the setting interface, select TRIG and press [ENTER] to enter the trigger interface, then use the [◀]/[▶] buttons to select the Kick pad.
Adjust Sensibility, Threshold, and Curve; raise Mask Time if the beater double-triggers.

Single-zone operation — only the head zone is active.
A TS cable is sufficient for single-zone kick pads; TRS also works (ring is unused).

T950 20"x12" Kick Drum also fits 73 other drum modules — see setup

Other compatible drum modules

Have a question? Read the FAQ. Need manual help? Email support.