Support

T550 12" Kick on Roland TD-10

Wiring, module settings, and tips for the T550 12" Kick when used with the Roland TD-10.

Yes — the T550 12" Kick works as a full kick on the Roland TD-10: single zone.

Trigger

Wiring: 1× TS or TRS → KICK input (1/4" TRS jack)

Single-zone kick trigger. Only the head zone is active.

Connect a 1/4" TS or TRS cable from the kick pad to the KICK input on the rear panel.

Press [SETUP], then press [F1 (TRIG)], and then press [F1 (BANK)].
Navigate to the KICK input.
Set the trigger type to KD7 (for KD-5 / KD-7); for other kick pads try K1 or K2.

Single-zone operation — only the head zone is active.
A TS cable is sufficient for single-zone kick pads; TRS also works (ring is unused).

T550 12" Kick also fits 73 other drum modules — see setup

Other compatible drum modules

Have a question? Read the FAQ. Need manual help? Email support.