Free Shipping on All Orders
Lemon

Support

T550 12" Kick on Alesis DM10 MKII

Wiring, module settings, and tips for the T550 12" Kick when used with the Alesis DM10 MKII.

Setup — T550 12" Kick on Alesis DM10 MKII

Works

The T550 12" Kick is fully supported on your Alesis DM10 MKII.

Trigger

Wiring: 1× TS or TRS → KICK connector on the DB-25 cable snake

Single-zone kick trigger via the cable snake. Only the head zone is active.

Cable routing

  1. Connect a 1/4" TS or TRS cable from the kick pad to the KICK connector on the DB-25 cable snake.

Module settings

  1. Go to Ext. Trig Menu. Select the Kick input.
  2. Adjust Sensitivity and Threshold to taste.

Tips

  1. Single-zone operation — only the head zone is active.
  2. A TS cable is sufficient for single-zone kick pads; TRS also works (ring is unused).