Support
T950 13"x5" Snare Drum on Alesis Strata Core
Setup — T950 13"x5" Snare Drum on Alesis Strata Core
WorksYes — the T950 13"x5" Snare Drum works as a full snare on the Alesis Strata Core: head + rim.
Head
Rim
Wiring: SD (Snare) on the cable snake → snare pad
The Snare trigger slot is dual-zone (head + rim), with independent Head Sensitivity, Rim Sensitivity, Head Threshold, and Rim Threshold. Snare articulations are Head, Rimshot, Rim Click, and XStick.
Snare and tom setup and troubleshooting guide ›Cable routing
- Plug the SD (Snare) trigger on the cable snake into the snare pad. The snake's plug goes into the Module Mount on the module's bottom panel, not the rear panel — the rear panel carries only the Tom 4 and Cymbal 3 trigger inputs (User Guide p.10, p.11).
Module settings
- Press the Kit button, then tap Trigger on the left edge to open Trigger Mode.
- Tap Hit Select and strike the snare to select the SD slot (or tap SD in the meter row).
- Load a dual-zone drum preset from the Library, then open Tweaks to set Head Sensitivity, Rim Sensitivity, Head Threshold, and Rim Threshold to taste.
Tips
- Head triggers from the center piezo; rimshot, rim click, and cross-stick come from the rim sensor on the TRS ring.
- If rimshots and rim clicks need rebalancing, open Advanced and adjust Rim Balance (-64 to 63).
- On an input that reads head and rim, if the wrong zone plays, tune the module's head/rim settings for this pad's size; values set for a different-size pad may not carry over.
T950 13"x5" Snare Drum also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71