Support
T950 13"x5" Snare Drum on Alesis Surge
Setup — T950 13"x5" Snare Drum on Alesis Surge
WorksYes — the T950 13"x5" Snare Drum works as a full snare on the Alesis Surge: head + rim.
Head
Rim
Wiring: Snare connector on the cable snake → snare pad
The Snare connector on the cable snake supports dual-zone (head + rim) triggering via the center piezo and the rim piezo.
Snare and tom setup and troubleshooting guide ›Cable routing
- Plug the Snare connector on the cable snake into the snare pad.
Module settings
- Hit the snare pad, or press its Snare Pad Select button, to select it.
- Press Utility, then press Page/Select until SEN (Pad sensitivity) appears; use the < and > buttons to set it.
- Press Page/Select to THR (Pad threshold) and set it with < / >.
- Press Page/Select to R-S (Pad rim sensitivity) to set the rim (rimshot) response.
- Press Page/Select to CUR (Pad velocity curve) to pick the dynamic response.
- Press Save to keep the settings (otherwise they reset at power-off).
Tips
- Head triggers from the center piezo, rim from a second piezo mounted under the head.
- On an input that reads head and rim, if the wrong zone plays, tune the module's head/rim settings for this pad's size; values set for a different-size pad may not carry over.
T950 13"x5" Snare Drum also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71