Support

T950 13"x5" Snare Drum on 2Box DrumIt 3

Wiring, module settings, and tips for the T950 13"x5" Snare Drum when used with the 2Box DrumIt 3.

Yes — the T950 13"x5" Snare Drum works as a full snare on the 2Box DrumIt 3: head + rim.

Head Rim

Wiring: 1× TRS → SNARE input (1/4" TRS jack)

The snare input supports dual-zone (head + rim) triggering via center piezo and rim switch.

Connect a 1/4" TRS cable from the snare pad to the SNARE input on the rear panel.

Go to UNIT mode and page to the UNIT-TRIG page (PAGE UP / PAGE DOWN).
Select the SNARE channel by hitting the snare pad or with the CHANNEL UP / CHANNEL DOWN buttons.
Set TYPE to the pad type that matches the pad (e.g. PadPS for a piezo/switch dual-zone head+rim pad).
Set GAIN so all LED-meter segments light on the hardest hit.
Set THRES for the lightest stroke you want to register (range -48 to -18 dB).
Set XTALK (Off / Low / Med / High) if adjacent pads cause false triggers.
Set CURVE to match your playing dynamics.

Head triggers from the center piezo, rim triggers from the rim switch.
Both zones respond independently on the TRS connection (tip = head, ring = rim).

T950 13"x5" Snare Drum also fits 73 other drum modules — see setup

Other compatible drum modules

Have a question? Read the FAQ. Need manual help? Email support.