Support

T950 13"x5" Snare Drum on Roland V31

Wiring, module settings, and tips for the T950 13"x5" Snare Drum when used with the Roland V31.

Yes — the T950 13"x5" Snare Drum works as a full snare on the Roland V31: head + rim.

Head Rim

Wiring: 1× TRS → SNARE connector on the DB-25 cable snake

Dual-zone triggering: head (tip) and rim (ring) respond independently via the single TRS connection. The module's snare input reads both piezo (head) and rim switch/piezo signals.

Cable routing

Connect a 1/4" TRS cable from the snare pad to the SNARE connector on the DB-25 cable snake.

Module settings

Press the [MENU] button.
Use the cursor buttons to select "SYSTEM" -> "TRIGGER", then press [ENTER].
Press the [F1] (BANK) button to open the TRIGGER - BANK screen.
Select the SNARE input (strike the pad or use the cursor buttons).
Use the dial to set the trigger type to the model that most closely matches your connected pad (the full trigger-type list is in the module's Data List).
For finer control, press [F3] (BASIC) and adjust the pad's Sensitivity.

Tips

Head triggers from the center piezo, rim triggers from the rim switch.
Both zones respond independently on the TRS connection (tip = head, ring = rim).

T950 13"x5" Snare Drum also fits 73 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Audiofront eDRUMin

Donner

Efnote

GEWA

NUX

Pearl

Pearl Mimic Pro

Roland

Simmons

Yamaha

Have a question? Read the FAQ. Need manual help? Email support.