Official US store. Free fast shipping from US
Lemon

Support

T950 13"x5" Snare Drum on Alesis Strata Prime

Wiring, module settings, and tips for the T950 13"x5" Snare Drum when used with the Alesis Strata Prime.

Setup — T950 13"x5" Snare Drum on Alesis Strata Prime

Works

The T950 13"x5" Snare Drum is fully supported on your Alesis Strata Prime.

Head Rim

Wiring: 1× TRS → Snare trigger input (1/4" TRS jack)

The Snare trigger slot is dual-zone — Trigger Zone 1 reads Head and Trigger Zone 2 reads Rimshot (with Rim Click / cross-stick available on the rim) via the center piezo and rim switch.

Cable routing

  1. Connect a 1/4" TRS cable from the snare pad to the Snare trigger input on the rear panel.

Module settings

  1. Open Trigger Edit Mode and strike the snare, or use Hit Select, to select the Snare input.
  2. Pick the matching trigger preset, or set the input up from Trigger Input Tweaks so both Head and Rim respond.
  3. Tune Sensitivity and Threshold to taste; use Rim Balance to set how easily rimshots vs. rim-click / cross-stick sounds play.

Tips

  1. Head triggers from the center piezo, rim from the rim switch — both ride the one TRS cable (tip = head, ring = rim).
  2. Use the Snare Rim small encoder on the Kit Browser to choose Side Stick or Click for the rim sound.
  3. If a head hit falsely triggers the rim, raise XTalk Decay on the Snare input.
T950 13"x5" Snare Drum also fits 70 other drum modules — see setup

Support contact

Have a question? Read the FAQ. Need manual help? Email support.