Free Shipping on All Orders
Lemon

Support

12" 2-Piece Electronic Hi-Hat Cymbals on Yamaha DTX700

Wiring, module settings, and tips for the 12" 2-Piece Electronic Hi-Hat Cymbals when used with the Yamaha DTX700.

Setup — 12" 2-Piece Electronic Hi-Hat Cymbals on Yamaha DTX700

Reduced — switch (open/closed)

The 12" 2-Piece Electronic Hi-Hat Cymbals works on your Yamaha DTX700 with reduced zones.

Continuous Open Closed

Wiring: 1× TRS pad → Hi-Hat input + 1× TRS pedal → HH Controller input (1/4" TRS jacks)

The DTX700 manual documents continuous hi-hat control via the HH Controller input, but Yamaha's HH Ctrl is designed for Yamaha's own RHH135/HH65 signaling. Roland VH-series and Roland-CV-style pedal compatibility is not documented by Yamaha. Conservatively listed as open/closed for the Lemon pedal.

Cable routing

  1. Connect the hi-hat pad to the Hi-Hat input.
  2. Connect the pedal controller to the HH Controller jack.

Module settings

  1. TRIGGER button > select Hi-Hat > Trigger Setup: Pad Type, Gain, Sensitivity, Threshold, Crosstalk Cancel, Retrigger Cancel.
  2. MENU > Trigger > HH Controller Calibration for pedal setup.

Tips

  1. The Lemon pedal will trigger open/closed states via the HH Controller input.
  2. Half-open and splash articulations are not guaranteed — the DTX700 is calibrated for Yamaha's own RHH135 pedal curve, not Roland's.