Support
12" 2-Piece Electronic Hi-Hat Cymbals on Alesis Command
Setup — 12" 2-Piece Electronic Hi-Hat Cymbals on Alesis Command
Use as switch hi-hatThe 12" 2-Piece Electronic Hi-Hat Cymbals works on the Alesis Command as a switch hi-hat: open/closed only.
Continuous
Open
Closed
Wiring: Hi-Hat connector → hi-hat pad + hi-hat pedal lead → hi-hat controller, both on the cable snake
The Lemon hi-hat controller uses the Roland VH/FD convention, which Alesis doesn't document for continuous CV on this input — so with the Lemon controller, treat hi-hat as open/closed.
Hi-hat setup and troubleshooting guide ›Cable routing
- Plug the Hi-Hat connector on the cable snake into the hi-hat pad.
- Plug the hi-hat pedal lead on the cable snake into the hi-hat controller.
Module settings
- Go to Kit → Menu → Trigger and press Enter. Hit the hi-hat pad to select it.
- Adjust Sensitivity and Threshold.
- Press Save to keep the changes — otherwise they are lost when you power off the drum module.
Tips
- No pedal curve options are available — the module uses a fixed pedal response.
- Open/closed transitions may feel less nuanced than modules with pedal curve tuning.
- The module's trigger note chart gives every dual-zone input a second edge or rim entry, but none for the hi-hat — play the bow; edge strikes are not a documented zone on this input.
- If a single strike sounds twice, check the hi-hat's Trigger page for Retrig Cancel (not all parameters are available for all pads) — it sets the required amount of time between successive hits of the pad to produce the sound for both hits.
- If other pads set off the hi-hat, check its Trigger page for Xtalk (not all parameters are available for all pads) — keep it low: if the value is too high, a hit played together with another pad can be silenced as crosstalk.
12" 2-Piece Electronic Hi-Hat Cymbals also fits 71 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71