Support
12" 2-Piece Electronic Hi-Hat Cymbals on NUX DM-210
Setup — 12" 2-Piece Electronic Hi-Hat Cymbals on NUX DM-210
Use as switch hi-hatThe 12" 2-Piece Electronic Hi-Hat Cymbals works on the NUX DM-210 as a switch hi-hat: open/closed only.
Continuous
Open
Closed
Wiring: 1× TRS (pad) → Hi-Hat branch + 1× TRS (pedal) → HH Ctrl branch on the multi-pin trigger snake
Switch-type (open/closed) hi-hat. The DM-210 has no hi-hat calibration menu; with the Lemon controller the pedal drives open and closed articulations on this module.
Cable routing
- Plug the Lemon hi-hat pad into the HI-HAT branch of the trigger snake.
- Plug the hi-hat control pedal into the HH CTRL branch of the trigger snake.
Module settings
- In drum-kit mode, press the MENU button.
- Use the − / + buttons to select TRIG, then press OK.
- Hit the hi-hat pad to select it as the pad to adjust.
- Press OK to step to SENSITIVITY and THRESHOLD, and use − / + to set each value.
- Press MENU to return — the parameters save automatically.
- For open hi-hat, hit the pad without pressing the pedal; for closed, hit it with the pedal pressed.
Tips
- Half-open and splash nuance aren't available — the module distinguishes only open and closed.
12" 2-Piece Electronic Hi-Hat Cymbals also fits 69 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71