Support
Setup for your Yamaha DTX700
Lemon pads cover snare, toms, kick, cymbals, ride, and hi-hat on the Yamaha DTX700, with the limitations noted below.
- Snare 1-zone
- Toms 1-zone
- Kick 1-zone
- Crash 2-zone
- Ride 1-zone
- Hi-hat Switch (open/closed)
Module snapshot
- Brand
- Yamaha
- Model
- DTX700
- Also known as
- DTX700, DTX700K
Setup details by role
Snare pad 1-zone 1× TRS → SNARE input (1/4" TRS jack)
The snare input supports dual-zone (head + rim) triggering via center piezo and rim switch.
Tom pad 1-zone 1× TRS per tom → TOM1, TOM2, TOM3 inputs (1/4" TRS jacks)
The tom inputs support dual-zone (head + rim) triggering via center piezo and rim switch.
Kick pad Works 1× TS or TRS → KICK input (1/4" TRS jack)
Single-zone kick trigger. Only the head zone is active.
2-zone crash 2-zone 1× TRS → Crash1 or Crash2 input (1/4" TRS jack)
The DTX700 reads 2-zone cymbals (bow + edge) on its stereo TRS crash inputs — set the cymbal pad type so both zones register.
3-zone ride 1-zone 1× TRS from the cymbal's Ride 2 output → RIDE trigger input jack — bow only
Full 3-zone is not supported — the DTX700 reads cymbal zones with Yamaha's own single-cable scheme (resistance-coded rim switches), which the Lemon ride's switch zones don't match. Connect the cymbal's Ride 2 output and play it as a bow-only ride.
Hi-hat Open/Closed 1× TRS pad → [HI-HAT] input + 1× TRS pedal → [HI-HAT CONTROL] jack (1/4" TRS jacks)
The DTX700 has a dedicated [HI-HAT CONTROL] jack (p.12; specification [HI HAT CONTROL], p.57) and documents graded closing — a firmer press in the closed position for a tighter sound, plus a foot-splash (p.23). With the Lemon controller this module delivers open/closed hi-hat.
