Support
12" 2-Piece Electronic Hi-Hat Cymbals on ATV aD5
Setup — 12" 2-Piece Electronic Hi-Hat Cymbals on ATV aD5
WorksYes — the 12" 2-Piece Electronic Hi-Hat Cymbals works as a full hi-hat on the ATV aD5: variable pedal position.
Continuous
Open
Closed
Wiring: HH plug → hi-hat pad + CTL plug → hi-hat controller, both on the included multi-trigger cable
Full continuous hi-hat control. The aD5 has a dedicated hi-hat-control-pedal input on its multi-trigger breakout — the pad goes to the HH plug and the controller to the CTL plug (p.30). A third-party hi-hat pedal selector ([Pad Brand]/[Model], p.32) plus open/close calibration ([Set Close]/[Set Open], p.35 — [Set Open] appears only for a non-ATV hi-hat) let the Lemon bottom-plate controller read open, half-open and closed.
Hi-hat setup and troubleshooting guide ›Cable routing
- Plug the HH plug on the included multi-trigger cable into the hi-hat pad.
- Plug the CTL plug on the multi-trigger cable into the hi-hat controller.
Module settings
- Strike the hi-hat, then press [Pad Brand] and [Model] in the trigger menu to set the pad — for the hi-hat you also set the model name of the hi-hat controller on the same page — and press [OK] to confirm; [CANCEL] discards it (p.32). ATV's Pad Compatibility List covers ATV, Yamaha, Roland, ddrum and 2BOX, so pick the closest listed pair.
- Advance the pedal to the closed position and press [Set Close], then remove your foot and press [Set Open] (p.35 — [Set Open] appears only when a third-party hi-hat is selected).
- Press [Pedal HH Sens] to adjust the foot-close and foot-splash volume (p.35).
- Press the [OK] button to confirm the pedal settings — [CANCEL] discards them (p.35).
Tips
- Full variable continuous pedal control is supported (open, half-open, closed).
- For a non-ATV hi-hat, run [Set Open] as well as [Set Close] (p.35) — with ATV's own hi-hat the open point is set automatically.
12" 2-Piece Electronic Hi-Hat Cymbals also fits 71 other drum modules — see setup
Other compatible drum modules
Alesis
ATV
Audiofront
Donner
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71