Support
Setup for your Roland TD-17
Yes — Lemon pads cover snare, toms, kick, cymbals, ride, and hi-hat on the Roland TD-17.
- Snare 2-zone
- Toms 2-zone
- Kick 1-zone
- Crash 2-zone
- Ride 3-zone
- Hi-hat Continuous
Module snapshot
- Brand
- Roland
- Model
- TD-17
- Also known as
- TD17, TD-17KV, TD-17KVX, TD-17KVXS
Setup details by role
Snare pad 2-zone 1× TRS → SNARE connector on the DB-25 cable snake
Dual-zone triggering: head (tip) and rim (ring) respond independently via the single TRS connection. The module's snare input reads both piezo (head) and rim switch/piezo signals.
Tom pad 2-zone 1× TRS per tom → TOM1, TOM2, TOM3 connectors on the DB-25 cable snake
Dual-zone tom triggering: head (tip) and rim (ring) respond independently via the single TRS connection per tom input.
Kick pad Works 1× TS or TRS → KICK connector on the DB-25 cable snake
Single-zone kick trigger via the cable snake. Only the head zone is active.
2-zone crash 2-zone 1× TRS → CRASH1 connector on the DB-25 cable snake, or CRASH2 / AUX direct jack on the rear panel
Dual-zone crash triggering: bow (tip) and edge (ring) respond independently via the single TRS connection. Choke works by grabbing the cymbal edge. The TD-17 supports Roland CY-series 2-zone cymbals.
3-zone ride 3-zone 2× TRS → RD + RDB connectors on the DB-25 cable snake
Full 3-zone ride with separate RD (ride) and RDB (ride bell) connectors on the DB-25 cable snake — the TD-17KVX Setup Guide wires the stock CY-13R's BOW/EDGE jack to RD and its BELL jack to RDB, the same two-output layout as the Lemon ride.
Hi-hat Continuous 1× TRS → HI-HAT connector on the DB-25 cable snake + 1× TRS → HHC connector on the DB-25 cable snake
Continuous hi-hat control. Supports VH-10 and VH-11 pad types.
