Support
14" 2-Piece Electronic Hi-Hat Cymbals on Donner DED-300X
Setup — 14" 2-Piece Electronic Hi-Hat Cymbals on Donner DED-300X
Use as switch hi-hatThe 14" 2-Piece Electronic Hi-Hat Cymbals works on the Donner DED-300X as a switch hi-hat: open/closed only.
Continuous
Open
Closed
Wiring: 1× TRS (pad) → HI-HAT lead on the signal-connection harness + 1× TRS (controller) → the hi-hat-control lead on the harness
The harness carries a discrete hi-hat-control lead, so the Lemon controller connects. This module's hi-hat channel follows the Alesis/Medeli convention, which reads a Roland-convention controller as open/closed. The pad channel is single-zone.
Cable routing
- Connect the Lemon hi-hat pad to the HI-HAT lead on the module's signal-connection harness.
- Connect the hi-hat controller to the hi-hat-control lead on the harness with a ¼″ TRS cable.
Module settings
- MENU > SENSITIVITY > select HH > set SEN (drum sensitivity, 01-06), THREH. (trigger threshold, 01-32), XTALK (crosstalk threshold, 01-32), RETR. (repeat trigger, 01-32), and VOL (volume, 00-127).
- Press SAVE to store the settings to the current PRESET.
14" 2-Piece Electronic Hi-Hat Cymbals also fits 70 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71