Support
14" 2-Piece Electronic Hi-Hat Cymbals on Roland TD-25
Setup — 14" 2-Piece Electronic Hi-Hat Cymbals on Roland TD-25
WorksYes — the 14" 2-Piece Electronic Hi-Hat Cymbals works as a full hi-hat on the Roland TD-25: variable pedal position.
Continuous
Open
Closed
Wiring: 1× TRS → HI-HAT connector on the DB-25 cable snake + 1× TRS → HHC connector on the DB-25 cable snake
Continuous hi-hat control via the cable snake.
Cable routing
- Connect a ¼″ TRS cable from the hi-hat pad to the HI-HAT connector on the DB-25 cable snake.
- Connect a ¼″ TRS cable from the hi-hat controller pedal to the HHC connector on the DB-25 cable snake.
Module settings
- In the KIT screen, press [F3] (MENU), then [F3] (SETUP) to open the SETUP screen.
- Select "Trigger Settings", strike/select the HI-HAT input, and use the [INSTRUMENT] knob to set the Pad type to VH-11.
- Select "Hi-Hat Settings" and adjust the offset with the hi-hat's offset screw while reading the on-screen meter.
Tips
- Continuous pedal control provides smooth open-to-closed transitions.
- Calibrate the hi-hat offset after connecting for accurate pedal response.