Support
14" 2-Piece Electronic Hi-Hat Cymbals on Donner DED-300 Pro
Setup — 14" 2-Piece Electronic Hi-Hat Cymbals on Donner DED-300 Pro
Use with the kit's pedal controllerThe 14" 2-Piece Electronic Hi-Hat Cymbals works on the Donner DED-300 Pro as a continuous hi-hat driven by the kit's own pedal controller: open, half-open and closed positions.
Continuous
Open
Closed
Wiring: 1× TRS → Hi-hat plug on the trigger snake; keep the stock control box on the hi-hat stand (Hi-hat Control plug)
The DED-300 Pro ships a 12" hi-hat on a real hi-hat stand with a stand-mounted control box that reads pedal position — open, half-open, and closed all trigger, with the half-open threshold adjustable via the Half HC ADJ utility. The pad channel is single-zone.
Cable routing
- Plug the snake's labeled Hi-hat connector into the Lemon hi-hat pad's 1/4" TRS jack.
- Keep the Donner control box mounted on the hi-hat stand and connected to the snake's Hi-hat Control plug — it provides the pedal position.
Module settings
- MENU > SENSITIVITY > select HH > PS, THR, XTALK, RETRIGER, VOLUME.
- MENU > UTILITY > Half HC ADJ adjusts the half-open/close pedal threshold (the manual heads this menu UTILITY on p.13 but lists the item under AMBIENCE on p.12).
Tips
- Hi-hat MIDI notes: open = 46, half-open = 23, closed = 42, pedal close = 44.
14" 2-Piece Electronic Hi-Hat Cymbals also fits 69 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71