Support
Setup for your Alesis Strata Prime
Yes — Lemon pads cover snare, toms, kick, cymbals, ride, and hi-hat on the Alesis Strata Prime.
- Snare 2-zone
- Toms 2-zone
- Kick 1-zone
- Crash 2-zone
- Ride 3-zone
- Hi-hat Continuous
Module snapshot
- Brand
- Alesis
- Model
- Strata Prime
- Also known as
- Strata Prime, Strata Prime Kit, Prime, Prime Kit, Alesis Prime
Setup details by role
Snare pad 2-zone 1× TRS → Snare trigger input (1/4" TRS jack)
The Snare trigger slot is dual-zone — Trigger Zone 1 reads Head and Trigger Zone 2 reads Rimshot (with Rim Click / cross-stick available on the rim) via the center piezo and the rim piezo.
Tom pad 2-zone 1× TRS per tom → TOM 1–TOM 4 trigger inputs (1/4" TRS jacks)
Each Tom trigger slot is dual-zone — Trigger Zone 1 reads Head and Trigger Zone 2 reads Rimshot via the center piezo and the rim piezo.
Kick pad Works 1× TS or TRS → Kick trigger input (1/4" TRS jack)
Single-zone kick trigger — the Kick slot reads only the Head zone.
2-zone crash 2-zone 1× TRS → CYMBAL 1–CYMBAL 4 trigger input (1/4" TRS jack)
The four Cymbal trigger slots read Bow, Edge, and Bell, so a 2-zone crash lands its Bow and Edge zones with edge choke supported. Each Cymbal input is an individual 1/4" TRS jack.
3-zone ride 3-zone 2× TRS → RIDE trigger input + a CYMBAL trigger input
Full 3-zone ride (bow, bell, edge). The Lemon 3-zone ride is dual-output, so bow/edge read on the dedicated Ride input and the bell reads on a spare Cymbal input — with both connected, all three zones play with edge choke.
Hi-hat Continuous 1× TRS (pad) → HH CYM trigger input + 1× TRS (controller) → HH CTRL
Variable hi-hat is fully supported — the controller mounts under the cymbal and tracks the pedal's relative position continuously, so open, half-open, closed, chick, and splash articulations all play. The Hi-Hat slot also reads Bow, Edge, and Bell zones. Use a TRS cable for the controller: HH CTRL is one of the fourteen 1/4" TRS jacks in that row, and User Guide §2.2 item 7 scopes them as "Trigger Inputs (1/4" TRS [6.35 mm]) … Connect cables here to receive signals from drum and cymbal triggers, and a hi-hat pedal" (p.12).
