Support
20" Triple-Zone Crash/Ride on Alesis Strata Prime
Setup — 20" Triple-Zone Crash/Ride on Alesis Strata Prime
WorksYes — the 20" Triple-Zone Crash/Ride works as a full 3-zone ride on the Alesis Strata Prime: bow + bell + edge.
Bell
Bow
Edge
Wiring: 2× TRS → RIDE trigger input + a CYMBAL trigger input
Full 3-zone ride (bow, bell, edge). The Lemon 3-zone ride is dual-output, so bow/edge read on the dedicated Ride input and the bell reads on a spare Cymbal input — with both connected, all three zones play with edge choke.
Cable routing
- Connect a 1/4" TRS cable from the cymbal's Ride 1 output (bow/edge) to the RIDE trigger input on the rear panel.
- Connect a second 1/4" TRS cable from the cymbal's Ride 2 output (bow/bell) to a free CYMBAL trigger input.
Module settings
- Press the Kit button and tap Trigger to open Trigger mode; tap Hit Select and strike the ride bow to select the R (Ride) input, then load a matching Trigger Preset.
- Use Hit Select to select the Cymbal (C1-C4) input carrying the bell, load its preset, and assign a ride-bell instrument to that input in Kit Edit so bell hits play a bell.
- In Tweaks, set Bow Sensitivity (1.0-32.0), Edge Sensitivity (1.0-32.0), and Threshold (1-127) independently on each input.
- In Advanced, set Choke Time (1-200 ms) for the edge mute; if Edge and Bell feel swapped on either input, toggle Invert Bell & Edge (Off/On) there.
- If the ride zones interfere with each other, run Learn XTalk on the input that is causing the crosstalk.
Tips
- Grabbing the edge chokes the ride; the bell plays through the Cymbal input.
- If Edge and Bell feel swapped on either input, toggle Invert Bell & Edge there.
- If the bell is inconsistent, raise its Sensitivity and lower its Threshold.
- If the ride zones interfere with each other, run Learn XTalk on the input that is causing the crosstalk.
- If bow strikes also sound a second voice through the Cymbal input carrying the bell, silence that input's bow zone instrument.
20" Triple-Zone Crash/Ride also fits 74 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71