Support
Setup for your Alesis Nitro Max
Lemon pads cover snare, toms, kick, cymbals, ride, and hi-hat on the Alesis Nitro Max, with the limitations noted below.
- Snare 2-zone
- Toms 2-zone
- Kick 1-zone
- Crash 1-zone
- Ride 1-zone
- Hi-hat Switch (open/closed)
Module snapshot
- Brand
- Alesis
- Model
- Nitro Max
- Also known as
- Nitro Max, Nitro Max Kit
Setup details by role
Snare pad 2-zone 1× TRS → Snare connector on the 25-pin cable snake
The Snare connector on the cable snake supports dual-zone (head + rim) triggering via center piezo and rim switch.
Tom pad 2-zone 1× TRS per tom → Tom1, Tom2, Tom3 connectors on the 25-pin cable snake
The tom connectors on the cable snake support dual-zone (head + rim) triggering via center piezo and rim switch.
Kick pad Works 1× TS or TRS → Kick connector on the 25-pin cable snake
Single-zone kick trigger via the cable snake. Only the head zone is active.
2-zone crash 1-zone 1× TRS → Crash 1 connector on the 25-pin cable snake, or 1× TRS → CYM 2 jack on the rear panel
The Nitro Max crash input is single-zone (bow only) — the MIDI chart maps a single note per crash with no separate edge note. A 2-zone cymbal triggers the bow zone; edge strikes won't sound separately.
3-zone ride 1-zone 1× TRS from the ride cymbal (Ride 2 output) → RIDE connector on the 25-pin cable snake — bow only
The Nitro Max has a single, single-zone RIDE input — one trigger (MIDI note 51 = bow). A Lemon 3-zone ride plays as a bow-only ride; bell and edge won't register, and there is no pad-type menu to make the ride multi-zone.
Hi-hat Open/Closed 1× TRS (pad) → Hi-Hat connector on the 25-pin cable snake + 1× TRS (pedal) → the hi-hat pedal lead on the cable snake
Shares the Nitro-family hi-hat architecture. The pedal input is not documented as Roland VH/FD compatible — treat as open/closed.
