Support
20" Triple-Zone Crash/Ride on Simmons SD2000
Setup — 20" Triple-Zone Crash/Ride on Simmons SD2000
Use as 2-zone rideYes — the 20" Triple-Zone Crash/Ride works on the Simmons SD2000 as a 2-zone ride: bow + edge.
Choose your ride zones
Plug: Ride 1
Wiring: The RIDE1 lead of the multi-pin cable harness → Ride 1 (bow/edge)
Plug the ride lead of the harness into the Lemon ride's Ride 1 output for bow + edge — no cymbal modification. The SD2000 has a single ride connection, so you get two of the ride's three zones.
Ride setup and troubleshooting guide ›Cable routing
- Plug the RIDE1 lead of the multi-pin cable harness into the cymbal's Ride 1 output (bow/edge).
Module settings
- Press [Utility], then the Function soft-key under "Trigger" on the Main Utility screen.
- Select the Ride input (Follow Trigger — strike it — or Current Trigger).
- Adjust Sensitivity, Threshold, Curve, Retrigger, Crosstalk, Splash Sensitivity until bow and edge strikes register cleanly.
- In your kit, load a ride-bow sample on the bow zone and a ride-edge or crash sample on the second zone.
Tips
- This is the out-of-the-box setup — no cymbal modification.
Or set it up as Bow + bell
Plug: Ride 2
Wiring: The RIDE1 lead of the multi-pin cable harness → Ride 2 (bow/bell, after the rewire)
Prefer the bell to the edge? A one-time, reversible jumper move inside the cymbal (~10 min) puts bow + bell on Ride 2. The SD2000 voices a ride bell — its note chart lists RIDE1, RIDE1 BELL and RIDE1 RIM as separate notes.
Rewire guide ›Cable routing
- Rewire the cymbal — move the internal red/black jumper from the Ride 1 input to the Ride 2 input.
- Plug the RIDE1 lead of the multi-pin cable harness into the cymbal's Ride 2 output.
Module settings
- Press [Utility], then the Function soft-key under "Trigger" on the Main Utility screen.
- Select the Ride input (Follow Trigger — strike it — or Current Trigger).
- Adjust Sensitivity, Threshold, Curve, Retrigger, Crosstalk, Splash Sensitivity until bow and bell strikes register cleanly.
- In your kit, load a ride-bow sample on the bow zone and a ride-bell sample on the second zone — bow and bell hits will play through the connected lead as expected.
20" Triple-Zone Crash/Ride also fits 76 other drum modules — see setup
Other compatible drum modules
Alesis
Audiofront
Donner
Lekato
Millenium
Pearl
Roland
- Roland Octapad SPD-30
- Roland SPD-SX
- Roland SPD-SX PRO
- Roland TD-02
- Roland TD-07
- Roland TD-1
- Roland TD-4
- Roland TD-6
- Roland TD-8
- Roland TD-9
- Roland TD-10
- Roland TD-11
- Roland TD-12
- Roland TD-15
- Roland TD-17
- Roland TD-20
- Roland TD-25
- Roland TD-27
- Roland TD-30
- Roland TD-50
- Roland TD-50X
- Roland V31
- Roland V51
- Roland V71