Support
Setup for your Simmons SD2000
Lemon pads cover snare, toms, kick, cymbals, ride, and hi-hat on the Simmons SD2000, with the limitations noted below.
- Snare 2-zone
- Toms 2-zone
- Kick 1-zone
- Crash 2-zone
- Ride 2-zone
- Hi-hat Switch (open/closed)
Module snapshot
- Brand
- Simmons
- Model
- SD2000
- Also known as
- SD2000
Setup details by role
Snare pad 2-zone 1× TRS → the SNARE lead of the multi-pin cable harness
The snare input supports dual-zone (head + rim) triggering via the center piezo and the rim piezo.
Tom pad 2-zone 1× TRS per tom → the TOM1/TOM2/TOM3 leads of the multi-pin cable harness (a fourth tom uses the side-panel Tom 4 jack)
The tom inputs support dual-zone (head + rim) triggering via the center piezo and the rim piezo.
Kick pad Works 1× TS or TRS → the KICK lead of the multi-pin cable harness
Single-zone kick trigger. Only the head zone is active.
2-zone crash 2-zone 1× TRS → the CRASH1 lead of the multi-pin cable harness, or the Crash 2 jack on the side panel
Dual-zone cymbal triggering on both crash inputs — the module's note chart gives CRASH1 and CRASH2 each a bow note and a rim note, and the side-panel Crash 2 jack is documented as taking a dual-zone drum or cymbal.
3-zone ride 2-zone 1× TRS: Ride 1 (bow/edge) → the RIDE1 lead of the multi-pin cable harness
Plug the Lemon ride's Ride 1 cable into the ride lead of the harness for bow + edge — no cymbal modification. The SD2000 has a single ride connection, so you get two of the ride's three zones.
Hi-hat Open/Closed 1× TRS pad + 1× mono TS (controller) → the HH and HH PEDAL leads of the multi-pin cable harness
The Lemon hi-hat pad and controller connect through the multi-pin cable harness and deliver open and closed hi-hat.
