Official US store Free shipping Bundle & Save up to 15%
Lemon

Support

15" Dual-Zone China on Roland TD-07

Wiring, module settings, and tips for the 15" Dual-Zone China when used with the Roland TD-07.

Setup — 15" Dual-Zone China on Roland TD-07

Works

Yes — the 15" Dual-Zone China works as a full 2-zone crash on the Roland TD-07: bow + edge.

Bow Edge

Wiring: The crash lead on the dedicated connection cable → cymbal

Dual-zone crash triggering: bow (tip) and edge (ring) respond independently over the one lead. Choke works by grabbing the cymbal edge. The TD-07 supports Roland CY-series 2-zone cymbals.

Crash setup and troubleshooting guide ›

Cable routing

  1. Plug the included dedicated connection cable's crash lead into the Lemon crash. Its other end goes to the module's single TRIGGER INPUT connector — each lead is labeled for its pad, and the manual's instruction is simply to "connect the appropriately labeled cable to each pad".
Crash setup and troubleshooting guide ›

Module settings

  1. Press [SETUP], select "PAD" with the cursor buttons, and press [ENTER].
  2. Strike the cymbal to select its input on the "PAD" screen.
  3. Select "Type" with the cursor buttons and use the dial to set it to CY8 or CY5 to match your cymbal.
  4. Fine-tune "Sens" (1-32) and "Threshold" (0-31) so bow and edge track evenly.

Tips

  1. Bow and edge zones respond independently.
  2. Choke works by grabbing the cymbal edge.
  3. A second crash is the "CR2" lead on the same dedicated connection cable, not a separate jack — the manual's own add-a-cymbal procedure connects CR2 to the added pad (p.21).
15" Dual-Zone China also fits 76 other drum modules — see setup

Other compatible drum modules

2Box

Alesis

ATV

Audiofront

Donner

Efnote

GEWA

Lekato

Millenium

NUX

Pearl

Roland

Simmons

Yamaha

Support contact

Have a question? Read the FAQ. Need manual help? Email support.